EPODEX Separating Agent Spray for Epoxy Resin - 400 ml

Release Agent Spray

A fast, even release film for moulds and formwork. Solvent-free and silicone-free, it leaves a transparent layer that lets castings lift out cleanly without marking the surface.

How to use

Shake well. Spray thinly and evenly from 20–30 cm. If even surfaces are required wipe the release film with a soft cloth.

• 400 ml can - covers approximately 5–7 m²
• For epoxy, polyurethane, acrylic and polyester resin
• Also for smooth GRP and silicone moulds
• Solvent-free and silicone-free

Aerosol - ground shipping only. Cannot be sent by air.

Warning Danger
Danger Extremely flammable aerosol. Pressurized container: may burst if heated. The information on the product label must always be followed.